The Zeta conventional explosion proof manual call point is manufactured from aluminium with a built-in push button activator. The call point is finished with red anti-corrosive epoxy powder coating with 2 x 20mm cable entries. This unit is equipped with a stainless steel hammer and chain.
The ZT-CP3 and ZT-CP3/WP call points are unique in that they mimic the feel of breaking glass whilst offering the user the benefits and environmental advantages of a re-settable operating element.
SensoMAG MCP50 is a manual call point designed to work in conventional fire alarm systems. The call point has a resettable fragile working element, that sends alarm signal to the fire alarm panel when triggered by a push in the indicated spot.
The LED indication informs the user for fire and test events.
FD3050 Manual Call Point – It is designed to release a signal for a Fire condition to the Fire Control Panel upon manual activation by breaking the glass on the place, signed with arrows. The light indication for activating the manual call point is provided by a red LED. There is a possibility for testing by a special key.It satisfies the requirements of the European Standard EN54-11 for a type A manual call point.
Button EMERGENCY STOP
The button operates with Control Panel and holds extinguishing, increasing the evacuation time. It is to be installed close to the object of extinguishing.Fire alarm line is controlled for a short circuit and for an interruption.
Button MANUAL RELEASE
The button operates with Control Panel FS 5200E and activates the extinguishing.
It is to be installed close to the object of extinguishing.
By means of this button forced extinguishing process can be started only after visual inspection of an authorized person if a there is a real fire condition.
Fire alarm line is controlled for a short circuit and for an interruption.