The fire detector provides reliable early warning of a Fire condition upon ambient temperature reaching a fixed temperature threshold.
It is available in two versions (A2S or BS) depending on the temperature threshold in accordance with the European Standard EN54-5.
The fire detector is suitable for premises with normal or high ambient temperature, with possible sudden changes.
The LF-HD-4112 Conventional Type Heat Detector identifies fire with both rapidly rising and gradually increasing temperature. It has three levels of fixed temperature settings to adapt itself to the local temperature of the area being protected.
The LF-PE-4111 Conventional Type Photoelectric Smoke Detector uses a specialized smoke chamber design, which could sense the presence of smoke particles produced by fast combustion or slow smoldering fire. Combining fire algorithms stored on its memory with the special three part design of the smoke chamber and given the photo-sensor’s viewing angle, the detector can effectively sense both white smoke and black smoke with virtually no false alarms. A maximum of thirty smoke detectors can be installed on a single zone.
The Fyreye ultra-violet flam detector is particularly suited to applications where flames can be expected to develop initially rather than smoke. This is typically due to the nature of the materials being protected for instance camera film, computer, audio & video tapes or disks.
The Fyreye MkII optical smoke detectors use a pulsing IR LED & photodiode to detect IR scatter caused by smoke entering the chamber.
The LF/GD High Performance Gas Detector is used to detect various types of combustible gas. It is used mainly where there are possibilities of gas leakage like in chemical plants, gasoline stations, pharmaceutical factories, etc.
FD8020 Rate of rise heat detector
The fire detector provides reliable early warning of a Fire condition upon reaching a rate of rise of the temperature or fixed temperature threshold in the protected premises.It is available in two versions (A2R or BR) depending on the temperature threshold in accordance with the European Standard EN54-5. The fire detector is suitable for premises with normal ambient temperature, without possible sudden changes.
سری Twinflex
دارای تأييديه LPCB-CPR
قابليت بسته شدن كانال دود و يا حرارت و تغيير حساسيت سنسورها
قابليت جبران آستانه اي
داراي CPU مستقل براي بررسي شرايط محيط در هر لحظه
داراي ميكرو پروسسور
* گارانتی تعویض ۲ سال
دتکتور دودی اپتیکال مدل SensoMAGS30مدل متعارف با الگوریتم دیجیتال میباشد. این دتکتور ، دود ناشی از حریق را با سرعت بالا کشف مینماید. این دتکتور برای هر پانل متعارف اعلام حریقی که جریان الکترونیکی 10 تا 15 میلی آمپر دارد ، سازگار میباشد. این دتکتور ها دارای حساسیت بالایی میباشند. این سنسور برای مکانهایی که حریق دود زا دارند مناسب میباشد مانند ساختمانهای اداری ، سوپر مارکت ها ، مدارس و...
دتکتور حرارتی مدل SensoMAG F10 مدل متعارف با الگوریتم دیجیتال میباشد. این دتکتور ، حرارت بالای 60 درجه سانتی گراد را کشف مینماید (classA2S بر اساس استاندارد EN54 ). این دتکتور قابلیت کارکرد با هر سیستم اعلام حریقی را که رنج جریان مصرفی بین 15 تا 20 میلی آمپر را دارا میباشد. این دتکتور برای مناطقی که درجه حرارت ناگهانی تغییر زیادی میکند و این تغییر به شکل یک مدل ثابت میباشد ، یا مکانهایی که بخارات آب با غلظت بالا وجود دارد ، یا گازهای ناشی از سوختن گاز مانند مشعل ها و یا پر گرد و غبار .مانند آشپزخانه ها ، پارکینگ ها ، موتورخانه ها و یا مناطقی که امکان کارکرد دتکتور دود نیست.
The Photoelectric Smoke Detector P/N 63-1024, can be used in all areas where Photoelectric Smoke Detectors are required. The wide range smoke chamber makes the 63-1024 well suited for fires ranging from smoldering to flaming fires. The 63-1028 is a non-listed version of the photoelectric smoke detector. The detector is identical to the 63-1024, except the 63-1028 does not have the magnetic test reed switch. The 4” and 6” smoke detector bases and the 63-1012, two wire auxilliary relay base may be used with the 63-1024 and 63-1028
The fire detector provides reliable early warning of a Fire condition responding to fixed threshold smoke concentration or rate of rise of the temperature or fixed temperature threshold detected in the protected premises. It combines the advantages of a type FD8020 and a type FD8030 and it is an attractive option due to decreased expenses for supply and installation. The fire detector complies with the requirements of the European Standard EN54-5 (temperature class A2R) and EN54-7. Technical data
دتکتور نرخ افزایش حرارتی مدل SensoMAG R20مدل متعارف با الگوریتم دیجیتال میباشد. این دتکتور ، حرارت بالای 58 درجه سانتی گراد را کشف مینماید (classA1R بر اساس استاندارد EN54 ). این دتکتور قابلیت کارکرد با هر سیستم اعلام حریقی را که رنج جریان مصرفی بین 15 تا 20 میلی آمپر میباشد. این دتکتور برای مناطقی که درجه حرارتهای مختلفی دارند مانند کارگاههای مکانیکی ، تولیدی و... قابل استفاده است. همچنین برای مناطقی که دارای فضای غبار آلود و یا رطوبت نسبی بالا میباشد مورد استفاده قرار میگیرد.
Optical flame fire detector FD 8040 is designed to provide early warning of a fire condition responding to open flame. The fire detector reacts within the light spectrum of the flame and has maximum sensitivity of the infrared range. The opearation principle is based on the reception of flame emissions with their typical flicker frequency within the whole spectrum range. The infrared sensor signal - amplified, filtered and shaped is being sent to the time delay circuit. If the flame impact has decreased during the time delay , the fire detector dos not activate.
دتکتور ترکیبی (دودی اپتیکال و نرخ افزایش حرارتی ) مدلSensoMAG M40مدل متعارف با الگوریتم دیجیتال میباشد. این دتکتور جهت کاهش آلارم های کاذب استفاده میشود. این دتکتور برای هر پانل متعارف اعلام حریقی که جریان الکترونیکی 10 تا 15 میلی آمپر دارد ، سازگار میباشد. این دتکتور ها برای مکانهایی که از اهمیت بالا و یا امنیت بالایی میخواهند برخوردار باشند استفاده میشود مانند موزه ها ، مکانهای قدیمی ، هتلها و...
Duct smoke detector YKB-02 is designed to detect the presence of smoke in airstream of ductwork sections or ventilating compartments by the smoke detector mounted in it.