ZIOU-DG – Zeta Addressable Input/Output Unit with Isolator provides two voltage-free, single pole, change-over relay outputs, a single monitored switch input and an unmonitored, non-polarised opto-coupled input.
The Input/Output Unit is normally supplied with a backbox for surface mounting. It is also available without the backbox for flush mounting. Both versions are designed for indoor use only. Four LEDs, two red and two yellow, are visible through the front cover of the enclosure. One red LED is illuminated to indicate that the relay is set. The second red LED is illuminated to indicate that the switch input is closed.One yellow LED is illuminated whenever a fault condition (open or short circuit) has been detected. The other LED is illuminated whenever the built-in isolator has sensed a short-circuit loop fault. The enclosure is moulded from the same polycarbonate as Zeta detectors.
The Input/Output Unit supervises one or more normally-open switches connected to a single pair of cables.The Input/Output Unit is fitted with a bidirectional short-circuit isolator and will be unaffected by loop short-circuits on either loop input or output.
The Vimpex EX Series of Explosion-Proof Sounders and Strobes are available in a number of different versions and configurations to meet the demanding requirements of alarm notification in hazardous areas.
Models include sounders, strobes, combined sounder strobes, manual call points and switches. Typical applications include Oil and Gas, On-shore and Offshore, Petrochemical, Refineries and Marine.