The Securetone 2 addressable sounder has a low profile design which makes it ideal for locations where sounders are required to be unobtrusive. It is designed to work with the complete range of Zeta addressable control panels
The sounder is supplied configured to it’s maximum volume. However there is a potentiometer which may be used to adjust the sound level if required. An 8 way DIL switch is used to set the address, where switch 8 is the shadow operative switch. When in the position ON, the sounder will behave normally. When in the OFF position, the sounder will listen to commands without answering to the panel. This allows multiple sounders to be configured at the same address to allow for synchronised sounder operation.
ZIOU-DG – Zeta Addressable Input/Output Unit with Isolator provides two voltage-free, single pole, change-over relay outputs, a single monitored switch input and an unmonitored, non-polarised opto-coupled input.
The LF-CP Series Fire Alarm Control Panel is manufactured based on advanced technology while maintaining high quality during assembly. It is of solid state circuitry and is designed and tested to meet the requirements of industrial or commercial applications. Up to 30 devices, combination of smoke, heat and manual call points, can be connected to a single zone. Any alarm coming from a zone would activate the sounder circuits, common alarm relay, zone relay and the panel audible circuit. Once the panel has been silenced and a subsequent alarm occurs in another zone, the internal speaker and sounder circuits would then re-activate with its associated zone relay.
ساخت تايوان و داراي استاندارد CE اروپا