The Securetone 2 addressable sounder has a low profile design which makes it ideal for locations where sounders are required to be unobtrusive. It is designed to work with the complete range of Zeta addressable control panels
The sounder is supplied configured to it’s maximum volume. However there is a potentiometer which may be used to adjust the sound level if required. An 8 way DIL switch is used to set the address, where switch 8 is the shadow operative switch. When in the position ON, the sounder will behave normally. When in the OFF position, the sounder will listen to commands without answering to the panel. This allows multiple sounders to be configured at the same address to allow for synchronised sounder operation.
The Alert Point is an aesthetically pleasing, robust and fully featured stand alone alarm system.
Powered with a 9v PP3 alkaline battery, the Alert Point includes an integral sounder and resettable call point.
The Ani-Mate® animal friendly sounder uses a specifically developed low frequency tone (sub 400 Hz) that is designed to minimise discomfort to animals. The Ani-Mate® is designed to conform to the ‘silent’ fire alarm. The ‘silent’ fire alarm(1) was developed because of the need for an effective alarm signal in laboratory animal facilities which did not stress the animals every time it was tested. Small mammals in particular can be distressed by the frequency of tones emitted by standard electronic sounders and bells. It is only by using a conventional cone loudspeaker that pure low frequencies can be reproduced and thus disturbance to animals be minimised.