وضعیت موجودی موجود در ایمن بازار

قیمت: لطفاً تماس بگیرید

 

The LF-6100A 1/2 distributed intelligent fire alarm control panel is a microprocessor based advanced detection and protection system. With its flexibility, unique design and ability to utilize both intelligent and conventional devices, makes it a very reliable system for life safety use. It adopts the use of a multi-line LCD screen for ease of viewing of events and controls, RTOS (Real Time Operating System), for real time monitoring and display of events, and a graphical display for user-friendly menu and control operation as well as ease of identifying information being sent by field devices to the Fire Alarm Controller. 

کنترل پانل اعلام حریق LF-6100 A1/2|لایفکو|سری رابین

The LF-6100’s design widely applies to all kinds of industrial and commercial constructions with its high resistance to humidity, wide operating temperature range, high reliability and ease of installation and configuration. With its user-friendly interface, the controller also adopts easy to identify function switches and status LED’s that even untrained operators can understand and properly respond to the event that occurred (switches and LED’s explained further on the succeeding page). History recording is also an integral part of the system. All data is stored inside the system’s flash memory and can be viewed or printed at any time using the event browser. A stored history event adopts the circular type storage wherein the oldest data gets deleted in replacement of new incoming data when memory buffer is full. Maximum capacity of history memory is approximated at 999 events.
The controller can accommodate up to 2 loops - 500 addressable points at the most which is adequate enough for small to medium sized life safety applications. Each device has a code that is to be set using the LF-DP-6190 Device Programmer. An Auto-Learn feature for devices is also present in the system. The controller analyzes the environment on which the detection devices are installed and adjust the detector’s actuation level accordingly. It also utilizes a specialized loop circuit design, in which the device’s transmitted data is sorted out based on its priority. The information with the highest priority would transfer first. Other information from the field devices up to the controller shall be processed accordingly which ensures a rapid and efficient response of the system. Fire Alarm from a field device is transmitted in less than 1 second. A secure direct link control panel can also be installed for up to 5 critical facilities which are mainly used to start or stop an exterior device independently even upon failure of the main fire alarm controller. It is used for critical elements such as fire pumps, smoke control fans or other facilities which requires direct control even upon failure of the system’s processor. It is totally independent from the main controller but has the same functionality for monitoring alarm and line faults. The direct link control panel is secured with a lock and key for access restriction.
 
 

کنترل پانل اعلام حریق LF-6100 A1/2|لایفکو|سری رابین

جریان و ولتاژ ورودی
ولتاژ ورودی: (AC 220V (+10%~-15%
جریان مصرفی در حالت نرمال: 3W>
منبع تغذیه پشتیبان: (DC 24V, 7AH (built-in
فرکانس: 50Hz
حداکثر مصرف توان کنترلر خارجی: DC 30V, 1A
مشخصات فیزیکی
دمای عملکرد: 0°C ~ +55°C
مقاومت در برابر رطوبت نسبی: 95%≥
ابعاد: 4.80x3.80x10cm
رنگ: سفید
قطر سیم مورد استفاده: (1000m (2x1.5mm²≥ (1500m (2x2.5mm²≥
مشخصات فنی
ظرفیت ذخیره رویدادها: 999
تعداد دستگاه کنترلر خارجی: 5
عملگرهای قابل برنامه ریزی: 100including, OR1, OR2 & AND logic
رله خروجی اعلام حریق: 1 set (KA1, KA2) voltage free contact, normally open
رله خروجی خطا: 1 set (YA1, YA2) voltage free contact, normally open
مشخصات لوپ
تعداد لوپ: 2
ظرفیت لوپ: 127
حداکثر قطعات قابل پشتبانی: 254
بازه زمانی سرکشی لوپ: ≤10 seconds
روش سیم بندی لوپ: 2 wire loop
ولتاژ لوپ: (24V (18V~26V
برند سیستم اعلام حریق لایفکو | Lifeco
کد محصول FA-AD-Lifco-CP-6100 A1-2
وزن 1800 گرم

نقد و بررسی کنترل پانل اعلام حریق LF-6100 A1/2|لایفکو|سری رابین

• Closed Loop Design (Class A Wiring)
• Microprocessor Based System
• Intelligent Distributed System Structure
• Quick Response Time – Fire Alarm in <1 Second
• Capacity of 254 Addressable Devices
• 1 - 2 Intelligent Detection Circuits
• Up to 127 Devices per Loop
• Dynamic Supervision
• Fully Field Programmable
• 5” LCD Display – 320x240DPI Resolution
• 21 Key User Friendly Control Switches
• 15 LED Status Indicators
• Menu Driven Functions
• Up to 5 Secure and Independent Module Control Function
• RS485 Communication for Fire Repeater Display   Panel and CRT System.
• CAN Bus Communication for networking
• Laptop Programming
• 3 Level System Password Protection
• Logic Controlled Output Functions
• Circular History Event Flash Memory Storage
• Graphic Workstation Interface
• Up to 80 Network Nodes on a Single Graphic   Workstation
• Data Transfer Speed and Reliability
• High Performance at Low Cost
• Wall Mount Enclosures
 

نظرات کاربران درباره کنترل پانل اعلام حریق LF-6100 A1/2|لایفکو|سری رابین

نظری در مورد این محصول توسط کاربران ارسال نگردیده است.
اولین نفری باشید که در مورد کنترل پانل اعلام حریق LF-6100 A1/2|لایفکو|سری رابین نظر می دهد.

ارسال نظر درباره کنترل پانل اعلام حریق LF-6100 A1/2|لایفکو|سری رابین

لطفا توجه داشته باشید که ایمیل شما منتشر نخواهد شد.

بر اساس سلیقه شما...

پانل اعلام حریق آدرس پذیر مدل SIMPO دارای یک نمایشگر LCD بزرگ جهت کاربری آسان است. این پا ...
لطفاً تماس بگیرید
  کنترل پنل تعاملی IFS 7002 با چهار حلقه  سیگنال برای  کار با دتکتورهای آدر ...
  The LF-CP Series Fire Alarm Control Panel is manufactured based on advanced technol ...
لطفاً تماس بگیرید
  کنترل پنل اعلام حریق آدرس پذیر اوربیت مدل Revolution برای فضاهای کوچک و متوسط طراحی ...
لطفاً تماس بگیرید
طراحی و اجرا: فروشگاه ساز سبدخرید