The purpose of the FS5004/5008 Fire Control Panel is receiving signals from manual call points and automatic fire detectors, producing sound and visual signaling. The control panel is capable to engage external signaling and executing devices.
The LF-MCP-6103 Manual Call Point has a 2 way communication with the Fire Alarm Control Panel thus making it an intelligent initiating device. With its sleek and durable design, it can be installed anywhere along corridors, hallways and exits for easy access to operate in cases where there is a requirement for manually activating an alarm signal.
The Photoelectric Smoke Detector P/N 63-1024, can be used in all areas where Photoelectric Smoke Detectors are required. The wide range smoke chamber makes the 63-1024 well suited for fires ranging from smoldering to flaming fires. The 63-1028 is a non-listed version of the photoelectric smoke detector. The detector is identical to the 63-1024, except the 63-1028 does not have the magnetic test reed switch. The 4” and 6” smoke detector bases and the 63-1012, two wire auxilliary relay base may be used with the 63-1024 and 63-1028
The LF-CDI-6107 Conventional Zone Interface provides the means of connecting a single zone of conventional detectors to the Fire Alarm Control Panel. Typical connections would be conventional type smoke, heat, manual call point, heat sensing cables, and gas detectors. It can be used as an addressable alarm initiating device for conventional devices and as a control input for other auxiliary functions.