Installing a Vimpex Loop Sounder System with short-circuit isolation provides complete sounder circuit integrity. By wiring the sounder circuit in a loop instead of a traditional radial, all sounders will remain operational in the event of a short-circuit or open circuit fault.

The bell remains the most commonly used alarm for fire evacuation systems. Recognising this, Vimpex continue to innovate with their all-aluminium range of fire alarm bells. Five bells make up the range of 150mm (6 inch) and 200mm (8 inch) internal and external units. Being of aluminium construction, our bells have a very high volume output matched with extremely low power consumption - just 11mA for the 150mm internal.

Using the market leading aluminium gong for excellent sound output and a clear lens to maximise light output, the Vimpex StroBell is ideal for installations that call for a traditional bell tone but require visual indication as well.As with the Vimpex sounder range, all bells can be supplied branded with your company logo.

The Mini Stopper consists of a clear tough polycarbonate hinged cover that retrofits securely over the device. Simply lift the cover to gain access to the device. Once the cover is released the spring loaded hinge returns the cover to its original position.

Vimpex has incorporated a number of innovative lens and LED light technologies into the VAD23 Range that maximises light output for minimum current. With models that combine both a traditional electronic sounder or a voice sounder with a low current EN 54-23 rated VAD, the VAD23 is truly the most versatile family of visual alarm devices currently available - providing flexible solutions for the designer and end-user.

Vimpex has incorporated a number of innovative lens and LED light technologies into the VAD23 Range that maximises light output for minimum current. With models that combine both a traditional electronic sounder or a voice sounder with a low current EN 54-23 rated VAD, the VAD23 is truly the most versatile family of visual alarm devices currently available - providing flexible solutions for the designer and end-user.

The IS FlashDome is an intrinsically safe strobe for use in hazardous areas. Certified to ATEX and IEC Ex, the IS FlashDome is designed for use in Zones 0, 1 & 2.

In order to be intrinsically safe, the IS FlashDome must be powered via an approved 28v 300Ohm zener barrier or galvanic isolator.

Suitable barriers and isolators are available from Vimpex.

The Ani-Mate® animal friendly sounder uses a specifically developed low frequency tone (sub 400 Hz) that is designed to minimise discomfort to animals. The Ani-Mate® is designed to conform to the ‘silent’ fire alarm. The ‘silent’ fire alarm(1) was developed because of the need for an effective alarm signal in laboratory animal facilities which did not stress the animals every time it was tested. Small mammals in particular can be distressed by the frequency of tones emitted by standard electronic sounders and bells. It is only by using a conventional cone loudspeaker that pure low frequencies can be reproduced and thus disturbance to animals be minimised.

This compact 105dBA Security Sounder is designed as a stand alone unit for internal use. The unit is also capable of operating in an external protected environment such as polycarbonate bell boxes. The unit is surface mounted and is able to utilise square trunking.

The Vimpex EX Series of Explosion-Proof Sounders and Strobes are available in a number of different versions and configurations to meet the demanding requirements of alarm notification in hazardous areas.
Models include sounders, strobes, combined sounder strobes, manual call points and switches. Typical applications include Oil and Gas, On-shore and Offshore, Petrochemical, Refineries and Marine.

DIN rail mounted galvanic isolators and zener barriers for use with both the IS28 sounder and the IS FlashDome beacon are available from Vimpex.

This product provides a secure method for safely isolating the mains voltage supply to fire systems in accordance with BS 5839: Part 1 : 2013.

Ideal for applications that demand both audible and visual alarms. The bracket allows any combination of Banshee Excel sounder or fire alarm bell and strobe/beacon or Banshee Excel FlashDome to be simply mounted on a single bracket, without compromising on light or sound output.

Vimpex has incorporated a number of innovative lens and LED light technologies into the VAD23 Range that maximises light output for minimum current. With models that combine both a traditional electronic sounder or a voice sounder with a low current EN 54-23 rated VAD, the VAD23 is truly the most versatile family of visual alarm devices currently available - providing flexible solutions for the designer and end-user.

Because they’re moulded of polycarbonate material in a highly durable design, these protective covers carry a lifetime guarantee against breakage in normal use. They are easy to remove for servicing and tamper-resistant hardware is available.

The Hydrosense Water Leakage Detection System is designed to protect areas where water ingress could seriously damage electrical, communication and computer networks. When installed in vulnerable areas it continuously monitors for water leaks.Hydrosense can be installed in a wide range of applications including HVAC, sprinkler systems and water-cooled plant

Signaline HD analogue heat sensing cable must be used with a Signaline HD controller and End of Line Unit. These enable the Signaline HD heat sensing cable to be fully monitored for open and short circuit. The controllers are equipped with volt free fire and fault relays that are connected to the fire control panel via an Interposing Line Unit. Alternatively the Controller can be used as a stand alone device using the relay contacts to activate subsidiary equipme

The ReSet Series 01 of EN54-11 approved resettable manual call points mimics the feel of breaking glass whilst offering the user the benefits and environmental advantages of a resettable operating element.Once installed, the ReSet need never be opened for test or reset. With no moving parts accessible to the engineer or user, the ReSet is proven to be highly reliable and robust.

The Call Point Stopper consists of a clear tough polycarbonate hinged cover that retrofits securely over the device. Simply lift the cover to gain access to the device. Once the cover is released the spring loaded hinge returns the cover to its original position.

The Alert Point is an aesthetically pleasing, robust and fully featured stand alone alarm system.

Powered with a 9v PP3 alkaline battery, the Alert Point includes an integral sounder and resettable call point.

Vimpex has incorporated a number of innovative lens and LED light technologies into the VAD23 Range that maximises light output for minimum current. With models that combine both a traditional electronic sounder or a voice sounder with a low current EN 54-23 rated VAD, the VAD23 is truly the most versatile family of visual alarm devices currently available - providing flexible solutions for the designer and end-user.

Smart+Cage protects essential Fire, Safety and Security equipment from theft, vandalism or accidental damage. Constructed from PVC coated 4mm steel bar, these tough resilient waterproof cages provide security for a wide range of devices.

Here is an excellent way to protect your beacons and sounders against both vandalism and accidental damage. The newest members of the STI Wire Guard Team, these Stoppers were created in response to multiple requests from STI customers. They are easy to install with all screws and anchors provided.

This innovative wireless battery-powered magnetic Door Holder is triggered acoustically when the fire alarm sounders are activated. No external wiring is required and the unit is typically powered in excess of 12 months by 2 standard ‘C’ battery cells

Arguably the single most important fire safety mechanism, electromagnetic door holders guard against the lethal spread of toxic smoke and fumes - by far the greatest cause of death in fires.

Arguably the single most important fire safety mechanism, electromagnetic door holders guard against the lethal spread of toxic smoke and fumes - by far the greatest cause of death in fires

Arguably the single most important fire safety mechanism, electromagnetic door holders guard against the lethal spread of toxic smoke and fumes - by far the greatest cause of death in fires.

Arguably the single most important fire safety mechanism, electromagnetic door holders guard against the lethal spread of toxic smoke and fumes - by far the greatest cause of death in fires.

Arguably the single most important fire safety mechanism, electromagnetic door holders guard against the lethal spread of toxic smoke and fumes - by far the greatest cause of death in fires.

The Vimpex Relay Interfaces are designed to provide a connection between external equipment and alarm systems. Building Management Systems (BMS), security, fire and smoke dampers and lift shutdown are just some of the applications for this device.

The Identifire series of EN 54-4 Approved switched-mode power supplies has intelligent on-demand load sharing capability to provide exceptional flexibility. This allows rapid large capacity battery charging with either extended standby hold-up duration at light loads, or short high current peak loads where spare output capacity is diverted to battery charging.

The Vimpex VPSU 12 and VPSU 24 series of PSUs are switched mode power supplies ideal for general use, door holders and CCTV cameras.

Designed for fire detection systems requiring local indication of an individual or group of fire detectors in alarm mode, the VRLU indicator utilises an ultra-bright LED with a wide range of illumination.

The Banshee Excel BS base sounder can be surface mounted onto a ceiling or wall using this cable spacing ring.

Designed to be fitted as a mounting collar around the Banshee Excel range deep base. This provides a wall mounting solution that does not require holes to be drilled through the deep base, thereby enhancing the weatherproof rating. This is particularly useful for external or harsh environments.

These super tough wire guards are designed to protect clocks, bells and similar instruments. Three sizes are available to cover a wide range of units. Each is constructed of 9-gauge steel wire with corrosion resistant polyester coating. Their octagon, spiderweb like shape also helps them take tough knocks in stride.

The Smart+Guard is a tough polycarbonate hinged protective cover that can easily be installed over a range of call points, emergency switches and other devices to provide protection from vandalism, accidental damage or misuse.

Stop unauthorised exits and entries through emergency exit doors. The Exit Stopper is a unique and highly effective way to alert you to any unauthorised exits or entries through any emergency exit door. It can also serve as an inexpensive security device and help prevent theft.

Stop theft, vandalism or misuse of fire extinguishers. If you are fed up with replacing or recharging your fire extinguisher, this sturdy, tamper-proof, self-contained device is the answer. It has proven highly effective in helping stop theft, misuse or vandalism of fire extinguishers. The Extinguisher Stopper will leave the extinguisher totally accessible for emergencies and will not interfere in the event

A wide range of sounders and strobes can be flush mounted into suspended ceilings to provide an aesthetically pleasing solution for areas such as offices, meeting rooms and reception areas.

The 110/230Vac to 24Vdc IP66 weatherproof mains pack allows the use of any Banshee Excel Sounder, Sounder Beacon or FlashDome to be powered directly from a mains supply. It is ideal for the replacement of mains powered bells or to enable a stand-alone unit to be separate from the fire alarm system. It provides ample current to power a stand-alone Banshee Excel sounder or FlashDome unit.

آژیر Banshee Excel™ CH 

بدنه این آژیر از پلاستیک ای بی اس ساخته شده و در برابر آتش مقاوم است. آژیر بنشی اکسل در سه رنگ قرمز، توسی و سفید برای گستره وسیعی از کاربردها ارئه شده است. این آژیر از یک پکیج کپسولی حرفه ای برای بخش آژیر خود بهره میبرد. تمام آژیرهای سری بنشی اکسل  پایه یکسان BansheeMT دارند.

Fire-Cryer® Plus

ترکیب صدا/فلاشر این امکان را به کابر می دهد که یکی از هفت پیام تعریف شده در دستگاه را جهت همراه شدن با چراغ فلاشرخاص، انتخاب کند.

زنگ اعلام حریق

زنگ همچنان متعارف ترین شیوه برای اعلام خطر می باشد. به همین جهت ویمپکس به نوآوری در زمینه زنگ های اعلام حریق تمام آلمینیومی خود ادامه می دهد...

آژیر فلاشر

سیستم های اعلام حریق شده است DDAنور و صدای زیاد باعث سازگاری دستگاه با 

 به مجموعه قوانین و ضوابطی اطلاق می شود که منجر به سهولت خدمت رسانی به افرادا کم توان و ناتوان می شود ،Disability Discrimination  مخفف ADD

با استفاده از  مرغوترین آلومینیوم  برای دستیابی به بهترین خروجی صدا و لنز شفاف برای حصول به بالاترین سطح  درخشندگی، همچنان پیشرو در بازار است

آژیر فلاشر ویمپکس ایده آل برای پروژه هایی است که علاوه بر صدای هشدار رایج، هشدار بصری نیز ضروری می باشد

پایه آژیر Banshee Excel مدل BS

این آژیر باریکترین آژیر در کلاس پایه دتکتورها است. صدای آن در تمام جهت ها پخش شده و با مابقی آژیرها سازگار میباشد.

Mini Fire-Cryer® Plus

Slimline base sounder for discreet mounting under fire detectors. Cover plate available for wall mounting.

Banshee Excel Lite™ CHX & CHL Sounder Beacons

The Banshee Excel Lite combines the aesthetics and performance of the Excel Sounder with either a very bright and efficient Xenon beacon (CHX model) or a low-current LED beacon (CHL model). 

Manufactured in flame retardant polymer, the units are available in a choice of base colours and up to 5 different lens colours, making it suitable for a range of fire and security dual notification applications as well as DDA-compliant installations. All models use the push and twist bayonet fitting BansheeMT base.

Midi & Maxi Fire-Cryer® Plus

آژیری با صدای پرقدرت که برای اماکن صنعتی، انبارها، محیط های عمومی و فضای آزاد طراحی شده است.