The LF-AV-6125 Audible and Visual Alarm Indicator adopts a built-in integrated circuit, a piezoelectric sounder and a flasher which when combined, produces a high energy conversion efficiency for effective output of light and sound while utilizing a minimum amount of power. It is also directly connected to the detection loop of the Fire Panel to effectively monitor the device for faults or control for alarm activation.
The LF-DP-6190 Address Programmer is responsible for addressing fire alarm devices such as call points, detectors and modules connected in a loop. Up to 250 devices can be given identification per loop.
The LF-CDI-6107 Conventional Zone Interface provides the means of connecting a single zone of conventional detectors to the Fire Alarm Control Panel. Typical connections would be conventional type smoke, heat, manual call point, heat sensing cables, and gas detectors. It can be used as an addressable alarm initiating device for conventional devices and as a control input for other auxiliary functions.
The LF-SI-6105 Signal Input Module provides the means of connecting Direct Shorting Devices to the Fire Alarm Control Panel. The module converts a normally open contact input which could monitor and report the status of the contact to the Fire Panel.
The LF-LI-6190 Short-Circuit Isolator provides short circuit protection on addressable device circuits. When a short is detected by the LF-LI-6190, it isolates the affected segment of the circuit, allowing the remaining devices to continue operation.
The LF-RM-6106 Relay Module provides the means of directly controlling an auxiliary device and its status as well. The Relay Module can be operated either by manual operation using switch inputs, or by automatic control using the Fire Panel logic functions.
The LF-CSW-6154 Remote Control Module provides the means of directly controlling an auxiliary device and its status as well. With its flexibility, the user has the option of either utilizing a normally open or normally close dry contact available on the module. It has the provision of connecting a normally open switch feedback input to monitor the status of the controlled auxiliary device.
The LF-6100A 1/2 distributed intelligent fire alarm control panel is a microprocessor based advanced detection and protection system. With its flexibility, unique design and ability to utilize both intelligent and conventional devices, makes it a very reliable system for life safety use. It adopts the use of a multi-line LCD screen for ease of viewing of events and controls, RTOS (Real Time Operating System), for real time monitoring and display of events, and a graphical display for user-friendly menu and control operation as well as ease of identifying information being sent by field devices to the Fire Alarm Controller.
The LF-6150 Repeater Panel is responsible for replicating fire and trouble information of a specific region from the Fire Control Unit. The device can monitor the alarm or the trouble state of 4 loops with up to 508 addressable points at most and display its information.
The LF-PE-6101 intelligent type photo-electric smoke detector utilizes the light scatter sensing principle. It has an infrared light source, which emits signals and photo-diode, which senses the scattering light with the effect of smoke entering the chamber. The chamber is of light proof labyrinth type protected with thin metals mesh for protection from dust, insects and other external interferences.
The LF-FD-6104 Intelligent UV Flame Detector has a wide angular sensitivity that can reliably and quickly detect the presence of a flame within its field of view by sensing the ultra violet radiation emitted.
The LF-DB-LI isolating base is intended for use with the LF-6100 Series detectors. The LF-DB-LI isolating base senses and isolates short circuit faults on LF-6100 loops and spurs. In short-circuit conditions the integral red LED is illuminated.
The LF-HD-6102 intelligent heat detector provides an advanced method of detection, address programming and supervision, combined with sophisticated control panel communication. The detector uses a stateofthe-art thermistor providing 143°F (62°C) fixed temperature.
The LF-MCP-6103 Manual Call Point has a 2 way communication with the Fire Alarm Control Panel thus making it an intelligent initiating device. With its sleek and durable design, it can be installed anywhere along corridors, hallways and exits for easy access to operate in cases where there is a requirement for manually activating an alarm signal.